Neewer CB60B review: The fill light in our LEGO studio
Our Neewer CB60B review: the 70W bi-color LED that fills the shadows in our LEGO studio. Excellent light, color we keep at 5600K, buttons instead of a dial. 4.5/5.

This post contains affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, Dadnology earns from qualifying purchases.
The Neewer CB60B is the second light in our LEGO studio. Next to our Godox SL60IID key light, it is the fill light that keeps the shadows from going completely black. We bought both lights in June 2026, specifically for LEGO photography. The CB60B was a little cheaper back then; otherwise I would probably have bought a second Godox. It turned out to give excellent light, and it gets 4.5 out of 5 from me.
Like the Godox, it has been in use on every shoot since June, without a single problem. The CB60B is part of the cross-lighting setup described in our toy photography studio setup, and it is on for almost every photo and behind-the-scenes video we make.
Excellent light
The most important thing first: the CB60B gives excellent light. In our photos and videos, you cannot tell which of our two lights did what, and that is the point of a fill light. It should add light to the shadows without leaving its own signature.
Neewer specifies a CRI of 97+ and a TLCI of 98+, which are the figures that describe how accurately a light renders colors. Through a gridded striplight softbox, it gives us the soft, even fill the set needs.

Color temperature: Possible, but we do not use it
Unlike the Godox, the CB60B is a bi-color light. In theory you can set anything from 2700K, warm like a living room lamp, to 6500K, cool daylight. There are also 12 scene effects.
We do not use any of that. Our CB60B is set to 5600K and stays there, so it matches the Godox, which only does daylight. Two lights at different color temperatures on the same set would give us two different shadow colors, and that is not the look we want. The color moods in our photos come from other sources: the blue accent light behind the set and the fog.
That does not make the feature worthless. If you light people in a room with warm lamps, or you want one light to work in very different situations, bi-color is a real advantage over a daylight-only light like the Godox.
The annoying part: Buttons for brightness
Here is what bothers me. Brightness is the only setting I actually change on both of our lights, and on the CB60B it is set with buttons. That works, but it is fiddly compared with the Godox, where the same change is one turn of a dial. When you adjust brightness again and again during a shoot, you notice the difference every time.
Neewer offers its app and built-in 2.4G control as alternatives. I use neither: I switch the light on with the physical button and make every change directly on the light, so the buttons are what I deal with. For the one thing we adjust, the dial on the Godox is clearly the more pleasant solution.
How much light do you need?
Neewer rates the CB60B at 70W and up to 34,000 lux at one meter. On a tabletop, that is far more than you will ever use. Ours runs at between 5 and 20 percent of its power, just like the Godox, and that works perfectly.
So do not buy it for the maximum number. Buy it for good, steady light that you can turn down a long way, with room to spare when you light something bigger.
How we use it: The fill in a cross-lit set
The CB60B sits opposite the Godox SL60IID, on the other side of the set. The Godox is the key light, the CB60B the fill, and the fill runs a couple of stops below the key. That asymmetry is what gives LEGO models shape: if both lights ran at the same power, the shadows would cancel each other out and the set would look as flat as a catalog page.
A fill light is easy to get wrong. Too bright, and it flattens the scene; too dim, and the shadow side of a model disappears into the black slag of our stage. Being able to turn it down a long way and in small steps is what matters, which is why the brightness control is so important to us, and why the buttons bother us more on this light than they would on a key light you set once.
Like the key, the fill wears a striplight softbox with a honeycomb grid. The grid keeps its light on the model and off the backdrop, so the background stays dark enough for the fog and the blue accent light behind the set to show.
Video too
We film our behind-the-scenes videos under the same two lights. That is one of the reasons we chose continuous LEDs over flash: what you see while you stage the scene is what the camera records, for photos and for video alike, without changing the setup between the two.
Mounting and setup
The CB60B has a standard Bowens mount and a built-in umbrella hole, and Neewer says the stand bracket tilts through 180 degrees. It mounts on a light stand without trouble, and softboxes are very easy to attach.
The one thing I would change is the mounting lever. On the CB60B it gets in the way a little, and you cannot always tighten it all the way. The Godox lever is better here. It is a small thing, but together with the buttons it is why the Neewer gets half a point less than the Godox.
Noise and reliability
You can hear the fan slightly, but it is not disturbing at all, and we film our behind-the-scenes videos with it running. Neewer lists an ultra-quiet fan with overheat protection. Since June, we have not had a single problem with it.
Neewer CB60B vs Godox SL60IID
We own both, side by side, so this comparison comes from daily use.
| Neewer CB60B | Godox SL60IID | |
|---|---|---|
| Our role | Fill light | Key light |
| Color temperature | 2700K to 6500K | 5600K fixed |
| Brightness control | Buttons | Dial |
| Rated output | 34,000 lux at 1 m | 18,600 lux at 1 m |
| Mount | Bowens | Bowens |
| Mounting lever | Can get in the way | Firm, out of the way |
| Our rating | 4.5/5 | 5/5 |
In quality, handling and behavior, the two are very similar, and I cannot find any other weakness in one compared with the other. The real difference is the trade-off: the Neewer can change color temperature, which I have not needed so far, and the Godox has the brightness dial, which suits my workflow and is a decisive difference for me. That is why the Godox gets 5/5 and the Neewer 4.5/5, and our Godox SL60IID review covers the key light in detail.
Who should buy it
The CB60B is a good choice as a second light next to an existing key light, which is exactly how we use it. It is also the better pick than a daylight-only light if you need flexible color temperature, for example for video with warm room light or for people.
If you only ever shoot in daylight and change brightness often, the Godox SL60IID is the more pleasant light to work with. For a complete setup with softboxes, fog and small accent lights, start with our studio setup guide, and for tight spots on a minifigure see our SmallRig RM01 review.
Pros
- Excellent light that works as an invisible fill
- Adjustable color temperature from 2700K to 6500K
- Plenty of reserve: we use 5 to 20 percent of its power
- Bowens mount takes standard softboxes
- No problems since June, fan only slightly audible
- Softboxes are very easy to attach
Cons
- Brightness is set with buttons, which is fiddly compared with a dial
- The mounting lever gets in the way and does not always tighten fully
The verdict
The Neewer CB60B is an excellent second light. It gives the same quality of light as our Godox key light, it can do adjustable color temperature if you need it, and it has run without a problem since June. What annoys us is the buttons for brightness, because when that is the setting you change all the time, a dial is simply nicer, and a mounting lever that gets in the way.
The Final Word: A great fill light, and the better choice if you need adjustable color.
๐ FAQ
Is the Neewer CB60B good for toy and LEGO photography?
Can the Neewer CB60B change color temperature?
What is the downside of the Neewer CB60B?
Neewer CB60B or Godox SL60IID?
How bright is the Neewer CB60B?
Keep this in your inbox
One email a week: what we actually watched, built and reviewed โ the stuff worth a dad's time. No hype, no daily spam.
Dadnology Weekly
One email a week: the LEGO, gaming and movie news worth a dad's time โ plus what we actually reviewed. No hype, no daily spam.
Disclaimer: This review and its visuals were created with the help of AI. Some links may be affiliate links โ we may earn a commission if you make a purchase, at no extra cost to you.
Current deals in Cameras
Verified live discounts tracked on Amazon

Cameras ยท Tested by Dadnology
Nikon Z8 Body
5/5“The Endgame body. No more compromises.”Read our reviewPrice as of Nov 16, 08:46 PM UTC

Cameras ยท Tested by Dadnology
Nikon Z5 Body
5/5“The unbeatable on-ramp to full-frame mirrorless.”Read our reviewPrice as of Nov 16, 08:46 PM UTC

Cameras ยท Tested by Dadnology
Nikon NIKKOR Z 40mm f/2
5/5“Tiny, cheap, brilliant. The grab-and-go prime.”Read our reviewPrice as of Nov 16, 08:46 PM UTC
You might also like


Godox SL60IID review: The key light behind our LEGO photos
The Godox SL60IID is a 5/5 key light: excellent, steady daylight, a brightness dial that makes small adjustments easy, a solid mounting lever and cables long enough for a real studio. Its one limit is the fixed 5600K color temperature, which we knew before we bought it and which fits our work.


Beach toy photography: How to shoot action figures and LEGO in the sand
The beach is the ultimate outdoor studio for toy photography if you respect the elements. Low ground-level angles turn sand ripples into mountain ranges, golden hour softens harsh plastic reflections, and a helping hand creates breathtaking in-camera dust storms.


SmallRig RM01 Mini LED light kit review: The toy photography game-changer
For LEGO and toy photographers, the SmallRig RM01 3-Pack is an absolute game-changer. Three tiny, waterproof cube lights with silicone diffusers, honeycombs, and snoots let you light a 4cm minifigure with Hollywood precision without spilling light onto the backdrop. Rated 5/5.